Portal Home > Knowledgebase > Manuals > FMB202 Quick Instrall manual


FMB202 Quick Instrall manual




You will only need to connect 2 wires from the GPS device: RED wire to +12(24)V, and BLACK to ground.
OPTIONAL: you can connect the YELLOW wire to +12(24)V to engine contact (to enable reports on engine hours used).


You can download Quick Install manual from here: 
https://eufleet.com/manuals/FMB202quick.pdf

Please pay attention to the installation location:
The GPS device should be positioned as "up" as possible, in a place where it could better receive GPS and GSM signals:
Pay attention to the GPS position:





Was this answer helpful?

Add to Favourites Add to Favourites    Print this Article Print this Article

Also Read